Wittson Ti Custom

I have a few miles up on this now and delighted with it. Geometry is based on a 650b MTB and can accommodate a 100mm suspension fork. Clearance for 700x42 and 650b x 2.2 tyres. Clearance for up to a 46 tooth chainring. 142x12mm dropout. Set up as a 1x11, 38T ring, 11-42 cassette. Shimano R685 hydraulics shifting an XT M8000 rear clutch derailleur via a JTek Shiftmate. This works perfectly but I will be changing it shortly to a Wolf Components Tanpan as it would allow better routing.

The_Mickstar wrote:What fork are you running?

Just a generic chinese fork for now.

Any chance of getting more pictures of the internal routing?  Can you run full cable housings?

I can and do.  I ride in a lot o   f wet and muddy weather and have like a full cable run.  Yes, it's a little fiddly to install but not that hard really.  I have some pics below but will post some of the final routing in a couple of weeks.

Originally I planned to use a Lindarets road link with an Ultegra RD, then I discovered the JTek shiftmate which allowed me to use a clutch 11 speed XT RD but made my routing a bit ugly.  Then Wolf Tooth announced their Tanpan http://www.wolftoothcomponents.com/collections/small-components/products/copy-of-roadlink which should solve all my problems.  When it arrives and I install it I will post pics of the final routing.