Loading…
Member
I forgot to ask what is the pin for and where does it go? I didnt change out the large ring. But thats only because the final bolt (it’s always the last) was stripped. So I stayed with the original GRX outer ring for…
Txs very much to @mtbnut87 and @ScottH for helping me get over the hump on a project I started working on 4 years ago. I wanted the ultimate gear range, and I prefer 2x systems, for an older person looking to enjoy…
ScottH wrote: I’m from the Lehigh Valley, PA. ’ve ridden D2R2 a few times up in Mass/VT and logging roads in Maine. We did the Farmers Daughter ride in NY which was ehh. And a long weekend near Ommegang Brewery road…
Txs…coolest thing (IMHO) of this build was when i swapped the Bitex hub to Onyx they engraved the face of Gorilla Monsoon the wraastler on the hub! I never had leaks with these and the only flats I got were on power…
ScottH wrote: This is with the GRX rings. . Interesting both you and mtbnut87 are running Ramblers it looks like? I had a pair of Thunderburts on the first bike i built up w a builder. How are they on the road? I just…
ScottH wrote: Yes, it’s as easy as that. It’s around $100 total cost because shipping is like $35 to the USA. Great txs…yes they now are about 2-3 weeks out for shipping to US. Have you used them long, it looks like the…
ScottH wrote: Not as …w i d e… as mtbnut87 but I’m running GRX Di2 with 44/28 chain rings and 11-36 cassette. Could do a 11-40 cassette with b screw turned out or road link. I swapped out the rings on my GRX 48/31 crank…
Added the Wolftooth and swapped out the cassette to the 11-46 and it works fine. I’d say shifting is perfect 90% of the time. Looking to see if I can find some Di2 to convert it to electronic. Debating trying a 11-41…
Thanks…here is what it looks like currently, I think you can tell from the RD, big-little, big-big, little-little and little-big. It shifts buy not always perfect. I had the b screw all the way in for the 11-42 cassette…
jannmayer wrote: I have an 11-46 cassette and a 46/30 crank with my GRX setup. I did get a Wolf Tooth Roadlink DM and I replaced the lower jockey wheel with a 16 tooth to increase the capacity a bit. Shifting is a…
Thanks I did not know that….if i can get the DA stuff for $300Im still in good shape as i can sell the derailures cheap and use the shifters. Then it’s a few hundred for the XT derailures and cage and all thats left is…
Great, I’ve bought from Universal before. Just curious as i was poking around, for a trial I can get a Dura Ace Di2 shifters, calipers and derailures for a few hundred bucks. I could also sell the rear derailure and but…
Great, I’ve bought from Universal before. Txs
Thanks I may take you up on that! I do not post much either so I greatly appreciate the offer. You paid $60 for a Di2 FD, where?? Im seeing about $290 per Di2 shifter, $110 front derailure at shops (Ive seen fakes on…
No, Im very interested in 11 speed options. This looks amazing and is exactly what I would like. What calipers are you using with the GRX Di2 shifters (Im wondering if all I need is the new Di2 shifters and derailures?…
Has anyone pushed the limits of the 12 speed SRAM AXS (Force or Rival)? I have a ‘21 Topstone 1 and have replaced the cranks with a GRX 48/31 and the cassette to 11-42 (using GRX 800 FD and 810 Shadow + RD) but wish I…
For what its worth I have a ‘21 Topstone 1 where i switched the cranks to GRX 48/31 & 11 speed 11-42 cassette with GRX 800 FD, GRX 810 Shadow + RD and GRX 600 shifters and it works great. Will try the 11-46 shimano…
Yes, I love the 48/31 crank, now Im 59 and not fast or strong but like riding and prefer to spin. I can use the 48 in all 11 gears and same with the 31…in fact went out today to test it (I have a frame issue so the…
Txs, I was wondering about a way without buying the cassettes and chains is all….
Txs…how do you figure out the true max low T for these? Shimano says 34t but im running 42 ez and there is people out there running the 11x46, im wondering if a 11x50 would work.