Loading…
Member
Ok, then it sounds like you need spacer because you're bottoming out, the question is how much of one, but as a guess 1mm should be all that you would need. I would think a bike shop would be able to tell you how much…
Here is website that might help: Why Is Your Cassette Lockring Not Tightening?- 6 Solutions This is from SRAM, scan down to about a third of the way down to where it says "Cassette Installation":…
I am trying to mount a 12 spd XPLR cassette to a Roval Terra C wheel. I have the correct XDR driver body on the hub. I can set the cassette onto the driver and the cassette easily threads onto the body. But when the…
For follow-up- The grinding noise was mostly gears 6-9...so I did try to fiddle with the micro-adjust, but had no luck. If anything, it just made it worse going in either direction. Removed the new cassette that was on…
Did you change the complete wheel or did you change the cassette only? If the noise disapears after changing the cassette only, you knew for sure, that it's the cassette, not the whole system. I have only swapped the…
I have two sets of identical Roval Terra C wheels. I previously used the wheels on my Diverge that was GRX 2X- one wheel had road tires and the other gravel tires. Each wheel had a Shimao 11-34 cassette, and I would…
Thanks everyone for the input. I would have probably ultimately opted to size down, but I actually elected to go with a Lauf Seigla Weekend Warrior Wireless (rigid fork). The tire clearance is not too far off from the…
I am 6' 1" also and rode the large. I had no issues. I have it for sale if you want to save some money. 2019 Rival 1X cutthroat. Thanks Renegade, but I am looking at bikes with 2X set ups.
I am 6' 1" and that falls between the 56 cm and 58 cm Cutthroat for sizing. I was able to ride both sizes- the 56 felt cramped and I would probably need to go with a 10-11 cm stem (stock stem was 8 cm), but I had plenty…
Nice ride! I appreciate the input. I'll reach out to Bearclaw and see what they say.
pushstart wrote: I don't have a Bearclaw, but my Cobalt is similar (it's custom / I designed it) and I believe Cobalt and Bearclaw use the same builder. I can just barely squeeze in 29x2.35" (60mm), which is certainly a…
Looking for owner's opinions on the two bikes above and how they might compare to other bikes that you may own (or have owned). Terrain where I live is very variable- can be hard pack, loose gravel, or rutted trail. I…