Loading…
Member
coffeebreak wrote: LBS ripping off people is nothing new. If you buy a $500 frame direct from source you are a cheap bast**d and look down upon you, if you buy same frame with Bombtrack written on it for 2.5k you are a…
coffeebreak wrote: LBS ripping off people is nothing new. If you buy a $500 frame direct from source you are a cheap bast**d and look down upon you, if you buy same frame with Bombtrack written on it for 2.5k you are a…
coffeebreak wrote: But first, what issues are you facing with these two components - Does your handlebar have a play when you rock it back and forth? Does your BB creak under load? IMO 3400 miles is really short…
How many miles can one expect to get out of a bottom bracket? Mine has about 3400 miles and the lbs say I need a new BB; SRAM BBX Cupset GXP Team English X-type f/TruVativ BBU329130301 Bontrager SRAM. Could the frame…
Chuddism wrote: So what are people doing to block the holes when running 1x? I'm going to be taking off the front derailleur hanger. Ideally I'd like to plug those holes. Thanks. Pretty sure my frame came with some…
One of my shimano spd xtr pedals is loose. It is tight in the crank, then moves too much from the spindle towards the pedal. Creaks when riding. Is this fixable if I bring into bike shop? Or am I looking at buying new…
Is it really already full? I checked around the 1st of the month and there were plenty of spots. I signed up for the waitlist today. What are the odds I get in? Is gravel racing signing up really this competitive? Don't…
Zx10freak wrote: I guess I took one for the team !the weather turned out as perfect as it could get and I really didn't needed to buy fenders. However the front fenders is a two piece deal so I kept the rear portion on…
Hey guys, I signed up for a race in mid August 240 miles. Due to work schedule and family life, I don't have a ton of time to do a lot of volume, but I should have a lot of time to do single long rides. What's the…
I didn't know what color I wanted so stuck with the matte black. It looks sharp and can always add color in tires, spacers, bar tape, stem cap, chain, etc. That being said, if I were to do it again, I would find a bike…
edraven wrote: I would wager if you had a professional book of RAL paint chips you'd find it doesn't match exactly. edraven wrote: I'm the same height as you and went with a 56cm with a 90cm stem Any room for frame…
I love my cfr696. I'm 5'11.75" and went with 54cm. 110mm stem, 170mm cranks. Can't fit any frame bags with the two 25oz podium bottles, also can't fit a bottle on downtube because wheel hits it. I might have been more…
Point wrote: It seems to vary depending on the axle you received but generally a 6mm hex or a torx bit. T:30 maybe? 6mm is the front. I think you're right on T 30, my multi tool has T 25 and that doesn't quite fit
What tool do I need to get the rear through axle off? Road my new cfr696 twice and rear tire fails to hold air. Tubeless tires and through axles are new to me
Thanks for the reply guys. I will see if the shop is comfortable sanding down the area. Should I just go ahead and get a new headset anyway?
Got my cfr696 a month ago. Bike shop building it up now, they want me to come look at it as there is some rubbing from the steer tube? Is this a common occurence? They aren't totally comfortable sanding it down. Should…