Loading…
Member
Need more gears on your gravel rig? Save some monies and buy this from me. $15 Like-New..... used for a week and the larger cassette is no longer needed. The RoadLink is a simple device that offsets the position of your…
was the course very rocky? I'm anxious to hear more about there durability as their website is pretty vague. Thanks!
Thanks RoverAl, I see them... Looks like they are in Spain.... I'll give it a shot. Cheers, John
where did you order the flintridge 35s from? I have the 40s but would like to try the 35s and can't find them anywhere. Thanks!
fatcharlie, what is the internal width or your rims? How the tires holding up? Cheers, John Biehn
it's a 2x 10 speed. front crank 46/34. Thanks!
I'm curious.... with a 40t in the rear do you find the rear derailleur can take up enough chain slack when in the small rings, say 11/34? Also, do you set the chain length so that it will work for the 40t and large…
jchap, what is the internal width of the rim you are using these on? And what bike frame? Do you know the suggested tire width for the frame? Thanks! John
After 80 plus miles of use this weekend, I thought I would share a short-term review on the Kenda Flintridge Pro 40s 120 tpi..... These are matched onto a Ti Warbird. Initial impression, the tires felt very sticky and…
I just setup a pair of theses on a iron cross wheelset. Measured 42mm. Setup went super easy with a hand pump. Tires felt stiff but durable. Headed out to ride tmrw. I'll report back on performance then. \n \nCheers, \n…
Hi All, I'm seeking recommendations for a 35-40c tire that would be a good match for the DK 200. It also needs to work on Stans Iron Cross Rims. In the past, I've used WTB Nano 40s and have had great results but I've…
DK just opened up 50 additional spots for support crew for-hire... Go get 'em! https://www.bikereg.com/dirty-kanza
DK just opened up 50 spots for support! Go get 'em!
(got a spot, thanks!) I'd love to get that spot for my Dad. Email sent.
I tend to ride quite a bit of singletrack on my gravel rig and like having a granny gear. If you are using a MTB 10spd cassette you could swap on a 40 or 42t cog... If you combine that with a 46/34 crank (just swap the…
I am also in this position. The original deadline was May 7th with no mention of a limited capacity. If anybody has a spot to sell please contact me jbiehn@gmail.com
Looking for a "Never let go" support crew for the DK 200.... Anyone able to help? Much thanks!
Hi All, Looking for a DK100 spot for my Father. Appreciate your help you can email me at jbiehnATgmailDOTcom. Thanks!