Loading…
Member
104/64 bcd spider, for gxp cranks. Blackspyre outer, TA inner chainring.
I was happy with my 6800 RD so I didn't feel the need to change it. I did,however, replace L and H screws on it with hex screws.
I switched to r8000 front derailleur because the arm of 6800 model rubbed on rear tyre. Same shifters as you. Works great. Plus, L and H adjustment screws are hex-type, and there is a built in cable tension adjuster…
I don't know if this helps, but you can run SRAM 10 speed rear derailleur and cassette with campy shifters. I had Veloce levers and SRAM x7 rear derailleur with a shimano 11-32 cassette. Cool thing about this setup is…
Campagnolo 10speed ergos work with SRAM 10 speed rear derailleurs (both mountain and road). I used to run veloce levers with x7 rear mech.
I actually wrote to NSB to ask if they would consider making a spider for gravel applications (meaning road chainline, mtb double rings) . Never got the answer. But I suppose if enough people asked the same question...
What is the concentration of ammonia you use? I'm having trouble sourcing anything stronger than 25% solution.
Has anyone used Specialized Hover bars ?
Ok, I have 47mm Elwoods on the bike now, front clearance is much better in the fork, while in the rear it's roughly the same as with furious freds.
Jtek shiftmate or Wolftooth tanpan will adjust shifter pull to mtb derailleur. As mentioned, 9speed mtb rear mech works with 10speed road shifters. Avid bb7s mtn don't work that well with road levers. You would need…
^^I wouldn't worry about those 3mm if this wasn't a carbon bike that I'm riding.
Well, it definitely wasn't tape as air leaks through valve holes on both rims, but at least I seated the tyres. My guess is that the valve type I have doesn't agree withthe rim prophile.
Well, I got myself a pair of terrene ellwoods in 47. I tried mounting them and I managed to seat the front tire in about 3 tries with my diy inflator. However, I failed to seat the rear, I have given up because I…
When I converted to 11s on novatec 712 hub I just filed off 2mm on the bottom of the splines as described in this article :…
I suppose that if one had a Dt swiss rear hub, and wanted to have that 10t cog, one could probably use One up Shark cluster with Shimano cs hg800 11-34 cassette, thus getting a 10-12-14-17-19-21-23-25-27-30-34. I happen…
https://whosatthewheel.com/2015/01/29/the-11-speed-switchover/
Large jumps are why I went back to 2x. It just didn't feel right.
reubenc wrote: Apparently Clement's gravel tires were made by a sub and sold under the Clement name. Clement MSOs probably won't be restocked, but you might be able to find some Donnelly (ugh) MSOs -…
dkoor wrote: \n \nThat kind of stuff terrifies me. I've made a decision some time ago that only acceptable carbon for me would be road carbon. Gravel, MTB carbon is a no for me. \nWell don't ride in mud so I'm not…
Well, given the increasing market for gravel bikes, naybe 650b version of Fred, or 50mm Burt would have a large audience. I totally agree on g-ones. \nBtw, Clement supposedly has the 50mm version of MSO, but none of the…