Loading…
Member
An update: The FC-MT210-2 2x9 crank fits just fine on my 2x10 rig, the frame/chainstay clearance is no more than 2mm but it does clear the frame and that's all that matters. I changed nothing else on the bike besides…
ccand51997 wrote: ... The point of this exercise is to be able to shift to 46/11 so I am hesitant about this plus as you said there is no going back. So I decided to try the FC-MT210-2 46/30T 2x9 cransket, I just bought…
Thijsvanderwal wrote: .. Same question as pkram
Will do!
Thijsvanderwal wrote: Looking at https://bike.shimano.com/en-EU/product/component/deore-m6000/FD-M6025-H.html the chain line of the Cube supplied FD is 48.8mm and has a 10T capacity. Those are both quite a bit off from…
Best case scenario, fingers crossed, it will work and I won't have to change a single thing on the bike. Worth trying for sure. Thanks for the replies 😊😃
since 2x is very niche for mtb's now Sadly true, but if one doesn't mind low end, there are still 2x and 3x options. If GRX 2x is not possible I can try the 2x9 crank mentioned above which is a perfect fit and possibly…
Will definitely be using the full range, also realised that person made a mistake: the bike shop would need to shave 2.5mm off each side. Hm..
I am going to read some more then, I was reading for the past hour and found one unusual solution i.e. ask the bike repair shop to shave 5mm off each side of the bb shell 😱 and I also found this…
Again thank you for the useful reply. Current crank chainline is 48.8 mm and GRX crank chainline is 47mm so the chainline is slightly off by 1.8mm. I also carefully measured the clearance, the frame thankfully has…
Thank you for the replies, I use them to learn. I can see there are bb available that fit both 68/73, so if there is an issue I can get one of those. I have looked into the chainline already, there is a 1.8mm…
Small clarification, the bike is 2x10 and it will stay 2x10, only thing to be changed is the crank from 36/26 to 46/30.
Hello everybody.. I have this bike ===> https://archiv.cube.eu/2021/403100 and I want to add a bit more speed by adding the FC-RX600 crank thus making something of a mountain/gravel hybrid, i.e. mountain bike with…