Loading…
Member
I have 140s front/back. No issues
Cody wrote: Did you have to cut the wolf tooth cage bolts to fit in the seat stays? I believe they are 15mm long. Yes. I used a pair of vise grip pliers, hack saw, and file. Took about 30 minutes for all 16 bolts I did.
@Vlanderen looks nice. But at this saddle angle, my back would be in trouble. Why is it lowered so far forward?" It's actually not. It's level, but the rear wheel is sitting on 5 inches of snow. You can see that the top…
Finally! Of course, it's all sorts of cold and snowy. GRX 2 mechanical, Hope Hubs, Hed Belgium 28/32, Wolf Tooth seat clamp, headset spacers, bling, Xpedo CXR cyclocross pedals. Will replace the tri seat and probably…
BeersAndBackroads wrote: Ah sorry about the confusion, I meant for the bottle/fender/rack mounts. Not sure what you mean by pitch, but I bought some anodized bottle cage bolts from Wolf Tooth. I trimmed them down with a…
Right! When I was a teen you could got AIDs from a toilet seat. Not quite. Sorry folks, but while this might yet spread around the world, right now influenza has killed 10,000 and hospitalized 200,000 right here in the…
kuucheki wrote: Hey guys I just got the 3d printed rear derailleur grommet. It fits pretty loose in the hole FYI. I put a few layers of really thin double sided tape on before mounting it. Hopefully it won't pop off.…
BTW, you are dealing with a communist country, not a free market, capitalist one like the USA. Who knows what's going on there? They could be quarantined. The government still controls everything just as democrats would…
Thanks, was actually referring to this hole in the rear stay. The supplied piece pictured is for housing from the hole to the rear der, but the other side is only wide enough for cable, not housing. I believe that the…
For those of you who ran full housing on the 696, how did you deal with the housing to the rear mech? The supplied part is designed for housing from the hole in the rear stay to the derailleur, but the other side only…
So, the package for my 696 came with two of these, one for the chain stay/brake housing, is this an extra or do I need it for the front fork? And if so, top or bottom hole? Doesn't seem to fit in either but might could…
kuucheki wrote: Looks good to go I will order it. New at this myself, but where did or will you order the online 3 D part and how much? I wonder if we can get bulk pricing as I'd like to buy 1-2! Let me know where you…
kirkom wrote: My finished Carbonda. It has been very light. 7.9 kilograms and that can be lowered in handlebars that is made of aluminum That is a niiiice lookin' bike.
Just found all my GRX packaging. There is an adapter in with the cable ferrules.
No, I don't, but I need to do it myself soon . . . this is the dealer manual from the Shimano website. Not much help as it only says "funnel adapter": https://si.shimano.com/pdfs/dm/DM-GADBR01-01-ENG.pdf
Colt__Seavers wrote: What do you mean near the top tube? The housing comes nowhere near that. Did you use the orange plastic tube to guide the housing? Should have read TOP of the DOWN tube. The orange housing was…
PeteKnuckles wrote: I'm running full housing and it was an absolute b!tch to do.. I just spent 4 hours trying to get it through. I resisted punching the bike. There was something mid way up near the top tube, probably…
RLB wrote: I am probably misunderstanding, No, the more I post, the more you will understand my legendary mechanic skills. 🙂
kuucheki wrote: I went full housing just because a few members had said that the shifting suffered greatly without full housing. Something about the cable guide under the BB not working correctly. Ha, ha, yeah. I'll say…
SteeleWheels wrote: That's cool. Do they come in 46 cm? As of November, Adam said they only had molds for 40 cm