Loading…
Member
Max wrote: I haven't been able to ride my bike yet as I've sent the crank arm off to get a power meter installed, but I'm going to get the digital caliper out and check the dimensions of everything. The SP definitely…
shalke wrote: They should do pre-orders tbh. Maybe they can ramp up the production. preorders will start at the end of this month.
GravelCat wrote: I'm going with the Cane Creek Hellbender 70 BSA 30mm Bottom Bracket - 68/73mm, BSA English Thread (For 30mm Spindle). Thank you for the reply, but I'm afraid this BB is a bit out of my price range! ^^…
To all the guys running an EC90 SL / EA 90 crank on their BSA 696: What Bottom Bracket are you using?
GravelCat wrote: Gotcha thanks for the info. I got RaceFace Next R cranks with a direct mount Wolf Tooth 42T chainring compatible for easton and raceface. hopefully it works cause the Next R cranks i got were dirt…
Just heard back from Wing. She told me that they expect to start taking reservations at the end of September.
wow it looks great! However the placement of the bottle mounts seem a bit inconvenient to me... From the first look it seems the frame has integrated cables. Does this mean you’d have to run integrated handlebars?
chuckaeronut wrote: Wow! Nice to see that the Conti‘s fit so well! Nice Setup with the Easton Crank + PM! 🥵🤤
Colt__Seavers wrote: I also advise you to use 30mm Easton cranks like EA and EC90. I was running it successful in my 505 build without any issues! Been using the Easton BB86 for it. I would always vote 30mm alu spindle…
Gerben321 wrote: Are the rings directmount? Not sure on their site. If it really isn't a problem on the 386EVO BB this is nice for sure in a 1x drivetrain! Yep the rings are direct mount. They use the RaceFace / Cinch…
Gerben321 wrote: Great, so that means DUB and other cranks that are (around) 30mm should be fine on both the 505 and 696? DUB / 30mm cranks would work on the 505 and 696. However imo DUB and GXP cranks should be…
Gerben321 wrote: But in the comments it's said that the 386EVO BB (that the 505 has) does allow for a proper 30mm spindles properly like BSA. But I am wondering why you would want to use such a big spindle, unless you…
Colt__Seavers wrote: small balls and thinner inner and outer ring doesn't mean that it will fail much quicker than a bearing with bigger balls. It doesn't come down to the material thickness and ball size only. The…
Colt__Seavers wrote: Please send me a link of the problems with 30mm spindle and BB86. The problem is that you need to use smaller bearings if you want to mount a 30mm crank in a 24mm designed BB like BB86 or BSA. The…