Loading…
Member
At last my 505 is finished and I love it, my first foray into the gravel market and this bike is just what I wanted, I've used 105 group set with TPR cable brakes and Hunt wheels and the bike as it stands is 8.9 KG…
Hi thanks for your replies,when I ride at 35-40 psi unladen the tyre is fine, the rim is the Stans flow ex and the sealant is Stans no leaks ;-) I had the same problem with the Conti trail king last year on the Tour…
Hi, I'm having problems when using my bike for bikepacking trips fully loaded 30kg + me at 80kg, while riding the tyre loses pressure and the rim is covered in sealant where it's leaking, this doesn't happen when I…
Can't help you with the caliper adapter because I used TRP Spyre, I've just finished fitting my rear caliper and the stay is 25mm thick so I used a 30mm bolt.
Thanks for the links I think I've got it figured out. My only concern is the amount of friction caused by the inner cable traveling through the thin white tube and also through the cable guide under the BB, will this…
After some help with my internal gear cable routing, should you push the inner through the hose inside the frame and use the frame entry and exit points as stops? or does the outer cable go all the way through? trouble…
Thanks Kittrin
SteeleWheels wrote: Thanks for the explanation. It's been a while since I built mine up and you are correct. I ordered the calipers for 160 so they came with the "adapters* pre installed so all I did was bolt them on.…
Hi, Yep I paid to the same address on Monday for my 505.
Thanks very much Widerisfaster that's what I was after
Hi, I'm looking for some help on buying my gravel frame, I was all set to buy the 505 when I saw the 696 pop up on this forum, I've had a scan through the forum but can't find what the difference is! apart from the…