Loading…
Member
Thanks for the advice! The adapter works but pricey and like you mention it's the same price as a caliper and sounds like the best solution.. I'm able to bleed myself so that saves me that hassle. Thanks again.
Hello, I was looking for some advice on if anyone has used A.S. Solutions adapter for flat mount calipers, link below. This would be fitted on a 2018 Willard 3 with 160mm rotors. Also will these just mount up to the…
I doubt a lighter bike overall would help keep up with other riders if you don't have similar legs/fitness. The biggest disadvantage that the 1X system for road riding is the lack of the tightly spaced gearing choices…
If you're using it as a true gravel/adventure bike then most riding would be done on the hoods, I find that a comfortable position but I'm more of an MTB rider. No bike at this price point has amazingly light rims but I…
That should be it, clockwise to remove on the drive side. I think the praxxis has this info on the BB.
That is a solid method, need to fill in those gaps where the tolerances may be a bit loose. The tools are worth adding to your toolbox, I think you have to buy the Praxxis BB tool but its $20. Some auto parts stores…
Does it make that sound when you are off the saddle and pedaling?
Just spitballing.....Make sure cranks are tightened to specs with a torque wrench? Try a light layer of grease on the seat post. My rear thru axle was squeaking and I replaced it with Robert Axle Project TA. My chain…
I forgot a couple of things, the chain was not tracking smoothly and I narrowed it down to the KMC 11 speed quick link. It seems to be too tight of a fit and it was binding the rollers. I replaced it with a 10-speed…
I had the same issue with the hub spacer and the thru-axle, there really should be a sticker on there like the pedals to make sure this is avoided. I was in a rush to put mine together so it's partly my fault but it's…