Loading…
Member
ilike29er wrote: Custom WaltWorks gravel bike True Temper OX Platinum steel Paragon polydrops for 135mm or 142mm thru axle 22.2 lbs as seen pictured super low bottom backet room for 45c tires with fenders Shimano 105…
Custom WaltWorks gravel bike True Temper OX Platinum steel 22.2 lbs as seen pictured super low bottom backet room for 45c tires with fenders Shimano 105 5800 Shifters Shimano 105 5800 50/34 165mm Crankset Shimano 105…
I have a pair of WTB Nano 700x40's on my R500 wheels. Using them as my primary commuter bike to work. Tires work just fine and haven't had any issues with them on those particular rims. I think they're measuring out…
Catalyst wrote: Been on this Vassago Donnybrook a few weeks now. My third ride on it was a 200k mixed surface adventure - true baptism by fire! Frame: True Temper OX Platinum Steel Front Fork: Whiskey No. 9 Carbon 15mm…
Hey guys, this is a really cool idea. Maybe I missed it in an earlier post, but how much are we talking for the cost of a kit?
shoaf wrote: @ilike29er regarding the Arch rim... the short version is that I bought it used. It has a White Ind. hub, which is what I have on my MTB (and now on both ends of of this bike, too). It came up for sale on a…
shoaf wrote: I got in a decent gravel ride on these GKSK 40s this weekend, plus I've ridden some regular mostly-"paved" (rough & busted chip-seal) loops near my house, and commuted to work on them this morning. So far,…
All City Macho Man Disc 49cm Shimano 105 5700 10 speed shifters FSA crank w/ SRAM x-sync chain ring 40 tooth Shimano SLX 11-36 cassette Shimano XTR 9-speed rear derrailure Salsa Cowbell handlebars Thomson seatpost and…
It works!! Just barely, though. Front wheel/tire combo fits inside the stock Enve RD fork. The rear wheel/tire combo fits, but it's awfully tight. Clearance at the rear chainstay is somewhere between 2mm and 3mm. I…
Ronnie, thanks for your willingness to take your wheel in to you LBS to see if it would fit on a Colossal. Drwelby, thanks for the measurements and explanation...very helpful. I bit the bullet and purchased a 650b…
Ronnie, thanks for the offer to borrow your wheels. Unfortunately, I live in the Denver area. \n \nWhich Habanero frame do you have? Is it CX or road specific? I ask because my concern is not having enough chainstay…
I have a 2013 Salsa Colossal Ti which came stock with Clement 700x28 tires on HED Belgium wheels. Just recently I saw pictures of someone who fit a pair of 650b wheels with 27.5x38 tires in their 2015 Salsa Colossal…
Anyone ride the 60 mile route last year in 2014? What are your experiences, comments, or advice about this route?
Okay, so last night I added a spacer on the non-drive side and this seemed to work for me. I was able to get a couple more millimeters of clearance. So, my concern of the non-drive side crank arm not having enough…
Thanks, shoaf. That's very helpful. I do have that wavy washer, but I also can't tell if that's an additional spacer. You definitely have more clearance at the crank arm than I do. Maybe I'll try searching for a similar…
@shoaf Yes, I also have that wavy washer installed. Good to know that your stock build is at about 5mm of distance between the non-drive side crank arm and chainstay. Do you happen to have a picture of what you are…
All, I'm reaching out to you in hopes of getting some ideas for my problem. I purchased a sexy All City Macho Man Disc frameset and have been slowly building it up over the past few months. Everything has gone smooth,…