Loading…
Member
I did get the carbon Easton bar, with 6 deg flare in size 42, went with actual size and it feels great. Not sure how much benefit there is on carbon over alloy, but the bar feels great. I have an alloy s works stem with…
First ride, Bike is amazing , like the Ultegra on it. Also paired it with a second set of wheels 650b 47MM tires and 11-40 XT cassette
My first ride on the bike today. Wheels and tires felt amazing , did mix of road gravel and single track. fast enough on road, excels on gravel, and doable on rocky single track but definitely isn’t a mountain bike.
First ride on the bike today, 42cm felt just right.
This makes sense , since it has plenty of flare on the drops, i feel the 44 might be too wide, wish i can test ride both than decide , but 2 bike fitters told me 42 is my size , was wandering if most go wider on their…
Hi , Looking to finalize the build on my 56 Diverge , I decided to go with the Easton EC70 AX. Handle bar, I’m not sure what size to take: 1. I ride a Tarmac 56 which came with 44cm handlebar, multiple bike fitters have…
Love it, thanks for the math lesson 😉 pushstart wrote: Yes, it's pretty easy math to calculate this. 650B is 584 ETRTO. That's the diameter, in mm. So divide by 2 and add the tire size to get the effective radius. (584…
clarksonxc wrote: the 165mm crank arms will definitely help, but 650b wheels with 47mm tires will sit significantly lower than 700c wheels with 47mm tires Offcourse, but with 700c wheels I plan to use 37MM WTB Riddler…
Yeah, low but not too low, wandering what the effective diameter of 650B with 47MM is compared to 700C with 37MM?
The BB drop is 80MM as per Specialized, I’m also planing to use 165MM Ultegra Crankset, I hope that will mitigate any possible issues with pedal strikes. I also plan to use WTB sendero 47MM Tires which i think will give…
Planing on purchasing the ENVE G27 and WTB sendero 47 tires as a second set for my Diverge S-works build, anyone has any experience with either, would love to hear any input.
Angstrom wrote: So My questions: 1. will gearing work with Ultegra 50/34 165mm crank, Ultegra FD Di2 and GRX RD-RX815, ST-RX815 shifters ? Ultegra crank and FD should be fine. 2. Does it make sense to get sense to get a…
But an ultegra crank and FD should work fine with GRX RD?
As I’m waiting for my S-works diverge frame to finally arrive (so far 1 month delay) I’m trying to put together my build. I own a set of Roval C38 wheels with 11-24 cassette and want to build a 2X. I also prefer shorter…
HI, looking to replace my sold Grail with a new Diverge , I plan to do 60/40 road to gravel riding, but will use this bike on vacations to do single track , fire roads adventures etc. Would love to hear from current…
TheSubaruGuru wrote: They only came in a 330mm. I have the normal zero-offset, with a choice of oval (carbon...usually a $25 option) or standard round clamps. I've used them in my Diverge and similar Roubaix for about a…
What sizes do you have? Will it fit the diverge ? TheSubaruGuru wrote: I have a couple used Canyon/Ergon split-beam posts; if you want one at only $85 shipped let me know. It's my favorite post, but a bit annoying to…
Hi, I really liked the grail and rode it for 2 years, but due to lack of front end adjustability I decided to try a different bike. I ride a 42cm on my tarmac but a bike fitter recommended a 40cm, on the new bike will…
I sold my canyon grail which I liked a lot but was never fully comfortable on it. Decided to go with a diverge S-WORKS build. since the frame cost is bank breaking decided to use what i have to outfit the new frame.…
Konass wrote: Sizing by static pics on the internet when the saddle isn't adjusted and one doesn't even have pedals on it is super sketchy at best. I would say go with your instinct and the measurements online. If you…