Loading…
Member
I could really use a 38T chainring on my Ekar. I really haven't found a need, on any of my wheelsets, to run anything other than the 10-44 cassette either. The biggest complaint I have is the front brake drags and hums…
My fulcrum Rapid Red 3 650b wheels are extremely quiet. Most of the time, I can't hear them at all above the noise of gravel. They retail for $760, but Fulcrum also makes the Rapid Red 5 for $520. No experience with the…
krovikan wrote: Because it's hard to fit 700c + 2 inch tires + drop bar geometry in the same bike. If you know any such frames please do tell me I'm interested. My Rodeo-Labs Flaanimal is 100/142 and will clear 29x2…
If you're set on a slick/semi-slick center tread, what about the Teravail Washburn? Teravail seem to be readily available at multiple retailers. But, with your desire for climbing and braking grip in potentially deep…
So far, I've pieced together enough Ekar stuff for 3 wheelsets: Cannondale HolloGram SL 45 Knot i21, 700x42 Teravail Rampart, 9-42T Spinergy GXX i25, 29x2.2 Teravail Sparwood, 10-44T Fulcrum Rapid Red 3 650b i24,…
Freehubs are finally hitting the market! Fulcrum is running full steam, Spinergy is saying by the end of the month, and I just received In-Stock Notifications from multiple suppliers for DT Swiss bodies.
I use a Kickr Snap with a 148 Boost MTB Frame. Kickr says the snap is not suitable for 148 axles, but I know plenty of people who've done it. You'll have no problem.
With your budget, I would be looking at the Poseidon X Frameset. They have Large in stock and it is very similar to a M/L Giant. $299
700x42 Washburn with Tan Sidewall... https://www.universalcycles.com/shopping/product_details.php?id=103489
@stu , It sounds like you're describing the Orbea Gain. I love the design and thought process that went into developing this bike. If I had to have an eBike, the Gain would be it. They just need a bit more tire…
The term "Custom" means different things to different people. Do you want the ability to hand select each component of a build, or do you truly want a frame built to your specs and all the parts you choose? There are…
It would be hard not to enjoy the ride with views like that!
zen_ wrote: Same subject, different angle, it will be interesting to see if the Microshift and Sensah 1x drivetrains creep further into entry level bikes. Although I prefer 2x, and would have a hard time giving up…
I referenced the below Bikepacking article alot when I was going through my build process initially. They provide a lot of feedback on ways to extend your range. https://bikepacking.com/gear/guide-to-mullet-drivetrains/
How about a WTB Byway 700x40/44? They have a smooth center tread with good knobs on the side. Supposed to be nice and quick on pavement. I've run WTB Exposure 700x36 tires on hookless rims with no issue.
What do you expect to "build up" on a bike that you purchase? The AL 7 is plenty capable and would serve you well. I had one and was extremely pleased with the performance.
Sounds like you needed a Chamois Hagar instead. I'm not sure I'd ever get used to Pink.
xtmtb wrote: But an ultegra crank and FD should work fine with GRX RD? That seems to be the guidance I've read. Ultegra will work just fine with GRX in 2x as long as the FD matches the crank. Q Factor is the main…
Spinergy GX looks like a winner if you look at cost/grams.
I just built a set of Light Bicycle AR24 Carbon wheels with DT 350s and Pillar Aero spokes for $669. 22mm internal with estimated weight of 1400 grams. They’ll be having a Black Friday sale, so you can save more.