Loading…
Member
Marwood wrote: Is that custom painted Matte black finish, or just the plain raw carbon finish? Raw carbon finish
Just got a quote to import a matte black CFR696 to California - $600 shipped + fees for frame only
Good to have options but fails the $1/g weightweenie cost/benefit rule of thumb
Your experience may vary but I've found that my Gravel Kings hold air pressure better than tubes.
kawabus wrote: Hi All - Headset question. I understand this is a 1 1/8 to 1 1/2 tapered fork. Looking to upgrade the stock headset. Are there other dimensions I need to consider? Looking at this one…
1. Yes it is pretty much guaranteed to work if it is 11-36T or higher, 9-42T and 10-42T will not work without switching to an XD freehub 2. Yes you will need an 11 speed shifter. The cheapest way is to add a Microshift…
You don't need a new RD unless you are going to a significantly bigger cassette. If you have a clamp on FD, you should be able to lower it if your seat tube is symmetrical. If you have a braze on FD, calculate the…
DT Swiss wheelsets
Anyone running the ZRACE hybrid cable/hydraulic flat mount calipers?
I have 48/32 with 11-36T in the back with Shimano RX800 - works great, no road link needed.
Carbonda CFR606 fork is like $80 + shipping with rack/cage mounts
I had the same issue with centerlock disk wheels. The issue is that the 15mm thru axle lock ring that uses the Shimano BB tool to install is too big. You need to swap it with the 12mm lock ring that uses the cassette…
GravelCat wrote: With all this headset talk, I did not order the factory one that comes with the CFR 696 frame. Can someone suggest what after market headset will fit? FSA NO.42/ACB ORBIT C-40 1-1/8" to 1.5" IS42 / IS52…
denismd wrote: 700c vs 650b on small size frames? I'm interested to hear from people that have small frames, what size whels/tires do you use? I'm planning to order a 696 in size 49, and was thinking of running 700x44…
Jonah10 wrote: Can anybody help me out? Seems like my hardlite rear thru axle is not able to go through the threads on the rear derailleur hanger? What's the length, thread pitch, and thread length on the hardlite axle?…
Add in a small 1mm or less spacer?
Why not 700x32 or 700x35? Too much bb drop going with 650x1.5
SKS B45
What half/full frame bags have you guys had any luck using?
Jonah10 wrote: Can anybody help me confirm that this post to flat mount adapter will fit on my post mount sram apex hydraulic calipers on my 696 frame? Thanks!…