New: Titanium gravel frame with selection of parts included

Brand new Frame, was a project we almost got off the ground but then by the time we did the market discovered the same things we did but were too late to compete. Frame was designed to fit 700x50mm tires as well as the Panaracer Driver Pro 2.2 in 650b. 1x only. This frame in particular was designed to clear mountain bike crank arms, but many road cranks work just fine. low standover height allows for seatpost to flex and compliment the titanium frame/big tires for a snappy, yet comfortable ride. 

Frame uses drop in bearings, so just put on the fork race and you're ready to go. Seat tube is 31.6. Rear spacing is 135mm QR. Why no thru axel? it's not needed. Plus used QR 29er wheels and hubs can be found really cheap allowing for a quiver of wheels set up for whatever your needs are on a budget. Headtube designed around tapered steerer forks but you can get a cane creek fork race that allows you to use an 1 1/8" fork until you can afford/justify a nicer one. 

Included in the price:

-3 bottle cages in orange (or red, yellow, or blue if you like) Velocity Cages were chosen as they accept a wide range of non cycling bottles as well rather nicely 

-Level Nine Seatpost. Factory brand of the company that makes Synatce's carbon post/bars. Same quality, same smooth ride. 

-SQ Labs Seat. $175 retail. Really comfy and brand new. 

-Origin 8 orange padded tape is grippy and just right amount of cush

-Dirt Drops, unbranded version of the Origin 8 Gary Ergo for most part 

Only asking $1000. Frame would have wholesaled at $1200 and was made by one of the top titanium factories in Taiwan that builds for the big brands. 

Geometry chart below. Feel free to message with questions or to purchase.